files/4451.webp
files/4452.webp
files/4453.webp
files/4454.webp
files/4455.webp
files/4456.webp
files/4457.webp

445

For performance you can rely on, trust the Husqvarna 445. This robust gas saw features Smart Start® technology and air purge to deliver best-in-class starting performance.* Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And the ergonomic design with LowVib® technology make this saw comfortable to use, even in demanding conditions.

50.2 cm³ Cylinder displacement

2.8 hp output shaft power

56.76 fts Chain speed at max power

Powerful and Efficient X-TORQ® Engine
Smart Start® Technology
LowVib® Technology

Engine	18" .325", X-Cut, 1,3 mm, SN, FA, single pack RTLBx SKU: 970613018
Chain speed at max power	56.76 fts
Cylinder displacement	50.2 cm³
Output shaft power¹	2.8 hp
Electrode gap	0.02 in
Idling speed	2,700 rpm
Ignition module air gap	0.01 in
Maximum power speed	9,000 rpm
Equipment
Recommended bar length, min	13 in
Pitch	.325"
Recommended bar length, max	20 in
Chain type	SP33G
Bar length	45 cm
Bar length (inch)	18 in
Gauge	.050"
Dimensions
Weight (excl. cutting equipment)	11.2 lbs
Sound and noise
Sound pressure level at operators ear	103 dB(A)
Sound power level, guaranteed (LWA)	114 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle	4.9 m/s²
Equivalent vibration level (ahv, eq) front handle	3.1 m/s²
Emission
Exhaust emissions (CO₂ EU V)²	920 g/kWh

Disclaimer:

¹Output shaft power: Net power rating as per ISO 7293, at specified RPM
²Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

DIAMOND R EQUIPMENT

Husqvarna 445 X-Torq® 18" Xc, .325 Pitch, .050 ga, 50.2cc Chainsaw FA, 970613018

SKU 970613018

Regular price: $419.99

445

For performance you can rely on, trust the Husqvarna 445. This robust gas saw features Smart Start® technology and air purge to deliver best-in-class starting performance.* Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And the ergonomic design with LowVib® technology make this saw comfortable to use, even in demanding conditions.

50.2 cm³ Cylinder displacement

2.8 hp output shaft power

56.76 fts Chain speed at max power

Powerful and Efficient X-TORQ® Engine
Smart Start® Technology
LowVib® Technology

Engine	18" .325", X-Cut, 1,3 mm, SN, FA, single pack RTLBx SKU: 970613018
Chain speed at max power	56.76 fts
Cylinder displacement	50.2 cm³
Output shaft power¹	2.8 hp
Electrode gap	0.02 in
Idling speed	2,700 rpm
Ignition module air gap	0.01 in
Maximum power speed	9,000 rpm
Equipment
Recommended bar length, min	13 in
Pitch	.325"
Recommended bar length, max	20 in
Chain type	SP33G
Bar length	45 cm
Bar length (inch)	18 in
Gauge	.050"
Dimensions
Weight (excl. cutting equipment)	11.2 lbs
Sound and noise
Sound pressure level at operators ear	103 dB(A)
Sound power level, guaranteed (LWA)	114 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle	4.9 m/s²
Equivalent vibration level (ahv, eq) front handle	3.1 m/s²
Emission
Exhaust emissions (CO₂ EU V)²	920 g/kWh

Disclaimer:

¹Output shaft power: Net power rating as per ISO 7293, at specified RPM
²Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.

Regular price: $419.99

Quantity

∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers ∼ Workshop Approved ∼ Your Build Deserves Better ∼ Trusted by Mechanics & Explorers

Product Description

445

For performance you can rely on, trust the Husqvarna 445. This robust gas saw features Smart Start® technology and air purge to deliver best-in-class starting performance.* Our proprietary X-TORQ® engine delivers superior performance, increased fuel efficiency and low emissions. And the ergonomic design with LowVib® technology make this saw comfortable to use, even in demanding conditions.

50.2 cm³ Cylinder displacement

2.8 hp output shaft power

56.76 fts Chain speed at max power

Powerful and Efficient X-TORQ® Engine
Smart Start® Technology
LowVib® Technology

Engine	18" .325", X-Cut, 1,3 mm, SN, FA, single pack RTLBx SKU: 970613018
Chain speed at max power	56.76 fts
Cylinder displacement	50.2 cm³
Output shaft power¹	2.8 hp
Electrode gap	0.02 in
Idling speed	2,700 rpm
Ignition module air gap	0.01 in
Maximum power speed	9,000 rpm
Equipment
Recommended bar length, min	13 in
Pitch	.325"
Recommended bar length, max	20 in
Chain type	SP33G
Bar length	45 cm
Bar length (inch)	18 in
Gauge	.050"
Dimensions
Weight (excl. cutting equipment)	11.2 lbs
Sound and noise
Sound pressure level at operators ear	103 dB(A)
Sound power level, guaranteed (LWA)	114 dB(A)
Vibration
Equivalent vibration level (ahv, eq) rear handle	4.9 m/s²
Equivalent vibration level (ahv, eq) front handle	3.1 m/s²
Emission
Exhaust emissions (CO₂ EU V)²	920 g/kWh

Disclaimer:

¹Output shaft power: Net power rating as per ISO 7293, at specified RPM
²Exhaust emissions (CO₂ EU V): This CO2 measurement results from testing over a fixed test cycle under laboratory conditions a(n) (parent) engine representative of the engine type (engine family) and shall not imply or express any guarantee of the performance of a particular engine.